GRIFF MOTORRAD

Super-Fast Grip glue - dries in 30-90 seconds!
Read and follow instructions carefully!
Attentiln: High viscosity!

Directions:

- clean and dry handlebar, throttle pipe and inside grips.
- if throttle pipe is damaged, replace it. Cover any openings to avoid gluing pipe to handlebar.
- apply beads of ARIETE SUPER-FAST GLUE to outside of throttle pipe, left end of handlebar and inner end of grips.
- align the grip in the correct position and quickly slide it on.
- clean off all excess glue at inner face of grip flange.
- before operating the vehicle, check that the throttle twist-grip moves freely. Fully open the throttle by turning the grip towards you, and then release it. The twist-grip should turn freely, and return to its normal closed-throttle position.

WARNING: Injurious to eyes and mucous membranes, bonds skin-to-skin in seconds. Harmful if swallowed. Flammable, do not expose to heat or open flame. Contains Cyanoacrilate. VAPOUR IS HARMFUL! Use only in well-ventilated areas, store in a cool dry place and keep container closed when not in use.

KEEP OUT OF REACH OF CHILDREN!

First aid hints should contact occur…

- EYES: wash immediately for at least 10 minutes with copious amounts of water, and contact a doctor.
- SKIN: wash the affected area with warm soapy water, carefully separate the bonded surfaces, and clean skin with a pumice stone. Peel, don’t pull!
- INHALATION: take the person involved out into the open air.
- SWALLOWING: seek medical help.

In case of spillage, wash immediately, peel off the glue, and wash the affected area.